Singleton Development Control Plan 2014

The Singleton Development Control Plan 2014  (SDCP 2014) applies to the Singleton Local Government Area (LGA) and commenced on the 9 May 2014. It is a statutory plan that supplement Local Environmental Plan requirements.

As of 1 December 2021, a reference to an Environment Protection zone (E1, E2, E3 or E4) in a document should be taken to be a reference to a Conservation zone C1, C2, C3 or C4. As of 26 April 2023, a reference to a former Business zone (B1, B2, B3, B4, B5, B7) or Industrial zone (IN1, IN2, IN4) in a document should be taken to be a reference to a new Employment zone E1, E2, E3, E4, MU1 or W4. For further information please see Standard Instrument (Local Environmental Plans) Amendment (Land Use Zones) Order 2021 (nsw.gov.au). To determine the new zone for land previously in Business and Industrial zones please refer to the published equivalent zones tables.

Singleton Development Control Plan 2014

Note

Singleton Council has recently updated it's Engineering Design Guidelines. As part of this review, Schedule 2 contained within the above Singleton DCP 2014 is to be replaced with Table 1 Road Hierarchy and Road Width from the Engineering Design Guidelines. Please ensure your proposed subdivision plans comply with the requirements of Table 1.

Engineering Design Guidelines

What is a Development Control Plan

A Development Control Plan (DCP) provides detailed guidelines and environmental standards for new development, which need to be considered when preparing a Development Application.

DCPs are also used by Council in the assessment of Development Applications. When designing development proposals, applicants need to address the relevant requirements of any DCPs which apply to their land/proposal.